FREE CS and WATER TESTING
Is your distilled water really good quality?
You may be surprised how impure homemade distilled or
deionized
water and colloidal silver can be. Let PII test it free
for you!
A water still must be operated at very specific conditions to produce good quality water, as 'boil over' or the entrainment of droplets of poor quality water will contaminate your distillate. If you start with typical 300 PPM water and run the still to 90 percent processed, the residue will then be 3,000 PPM and thus a very small amount of entrainment will ruin your distillate. Just 0.1% will add 3 PPM! For drinking and other uses this is excellent but for producing 3 to 5 PPM colloid of silver it is useless! If you insist on producing your own, for the production of colloidal silver, then buy a pure water meter for around $50 (or our colloidal silver generator with built-in digital meter) to be sure of what you are producing. Otherwise, take samples from your still at 50% done and 100% done and send for us to test. If here is a large difference in PPM you should stop and empty the still when half-way done! The last test we ran gave for a customer gave 6 PPM at 50% and 16 PPM at the end, both of which are of no value for making 5 PPM colloid. You may not know it, but you can not produce ions of silver if the water has excessive contamination, as the process of electrolysis will produce compounds of silver, if other material is present! Thus no ions of silver will be produced, the whole reason for the process! See Colloid for very detailed information and hints for producing the best colloid. You may wish to purchase distilled or deionized water from your grocery store or other other local source. At our Publics Market we find their brand of deionized water to be very good (less then 0.3 PPM) and only 59 cents a gallon (their distilled water varies from 0.5 to 16 PPM). We thus designed our unit to insert into a standard gallon jug of water. Our tests of water produced by customers stills indicate a very wide variation and thus many have problems in using it for producing a pure colloid of silver. Our COLLGEN2 unit is designed to shut off automatically at a preset PPM and the use of poor quality water or additives will cause it to shut off without producing any colloid. This is the reason we include a digital meter read-out of the PPM, so you can see the quality of the water at the beginning and the results at the end so you know exactly what you have produced. Send samples (one or two ounces) to the below address and include your Email address so we can reply with the FREE test results. DO NOT BOTHER if you have added anything, as our equipment will not accurately measure silver content, only total PPM. Samples should be put in a bottle that has been rinsed with pure water before filling with the test sample. They will not be returned, unless you send return postage and label. We do not sell distillation units or have stock in Publics, just being helpful and hoping some day you will buy the best Colloidal Silver Generator on the market, which we just happen to produce and sell. TO YOUR GOOD HEALTH, FRED
